data book supplement emc components smt inductors simid 0603 b82496-a
vakatseite (( 2 ))
smt inductors simid 0603 b82496- a siemens matsushita components 11.98 3 size 0603/1608 (inch/mm)) rated inductance 1,0 to 220 nh rated current 0,07 to 0,5 a construction l copper plated ceramic core l laser cutted l laquer coated features l extended induction range l high resonance frequency l suitable for reflow (ir and vapor phase) and wave soldering l same measuring frequencies for l and q applications l filtering of supply voltages, coupling, decoupling l antenna amplifiers l video cameras l mobile phones terminals l tin coated over nickel barrier plating l no leaching during wave soldering marking minimum marking on reel: manufacturer, part number, ordering code, l value and tolerance of l value, quantity, date of packing delivery mode 8- mm blister or cardboard tape wound on 178- mm ? reel
smt inductors simid 0603 b82496- a 4 11.98 siemens matsushita components dimensional drawing size 0603/1608 (inch/mm), approx. weight 4 mg ssb1338-l 0,30,2 0,30,2 1,60,15 0,80,15 0,80,15 dimensions (mm) abc 0,8...1,0 2,0...2,6 0,7...0,9 ssb1356-j layoutempfehlung a b c pcb layout recommendation
smt inductors simid 0603 b82496- a siemens matsushita components 11.98 5 characteristics and ordering codes for further technical data see page 7. l r nh toler- ance 1) q min f l ; f q mhz i r ma r max w f res, min mhz ordering code 2) 1,0 0,3 nh = ? a 7 100 500 0,05 6000 b82496- a3109- a 1,2 7 100 500 0,06 6000 b82496- a3129- a 1,5 8 100 500 0,07 6000 b82496- a3159- a 1,8 8 100 500 0,08 6000 b82496- a3189- a 2,2 8 100 500 0,09 6000 b82496- a3229- a 2,7 8 100 500 0,10 6000 b82496- a3279- a 3,3 9 100 500 0,12 5500 b82496- a3339- a 3,9 5 % = ? j 9 100 450 0,15 5500 b82496- a3399- j 4,7 9 100 450 0,17 4800 b82496- a3479- j 5,6 9 100 430 0,18 4600 b82496- a3569- j 6,8 9 100 430 0,20 3550 b82496- a3689- j 8,2 9 100 400 0,28 3500 b82496- a3829- j 10 10 100 400 0,32 2800 b82496- a3100- j 12 10 100 400 0,35 2800 b82496- a3120- j 15 10 100 350 0,41 2500 b82496- a3150- j 18 10 100 350 0,45 2300 b82496- a3180- j 22 10 100 300 0,50 2000 b82496- a3220- j 27 10 100 300 0,55 2000 b82496- a3270- j 33 10 100 300 0,60 1800 b82496- a3330- j 39 11 100 300 0,80 1800 b82496- a3390- j 47 11 100 250 0,95 1800 b82496- a3470- j 56 12 100 250 1,2 1800 b82496- a3560- j 68 12 100 250 1,3 1500 b82496- a3680- j 82 12 100 250 1,5 1500 b82496- a3820- j 100 12 100 200 1,8 1300 b82496- a3101- j 120 5 25,2 130 3,0 1200 b82496- a3121- j 150 5 25,2 100 4,5 1100 b82496- a3151- j 180 4 25,2 80 6,5 1000 b82496- a3181- j 220 4 25,2 70 7,5 900 b82496- a3221- j 1) closer tolerances upon request 2) ordering code for blister tape. for cardboard tape append the code number "020", e. g.: b82496- a3109- a020
smt inductors simid 0603 b82496- a 6 11.98 siemens matsushita components taping packing packing unit: 3000 pcs. per reel ssb1344-v a 3,50,05 1,750,1 a 80,3 schnitt a-a abspulrichtung direction of unreeling section a-a 1,3 max. 0,25 20,05 40,1 1,80,2 10,2 40,1 +0,1 0 1,5 _ ssb1341-6 600,5 w a 20,5 210,8 ?130,5 a = 178 2 mm w = 9 0,3 mm
smt inductors simid 0603 b82496- a siemens matsushita components 11.98 7 general technical data rated inductance l r measured at frequency f l , with rf lcr meter hp 4286a and test fixture hp 16193a q factor q min measured at frequency f q , with rf lcr meter hp 4286a and test fixture hp 16193a rated current i r maximum permissible dc with an inductance decrease of d l / l 0 10 % and/or temperature increase of 20 k at rated temperature t r = 85 c self resonance frequency f res, min measured with network analyzer hp 8753d dc resistance r max measured at 20 c ambient temperature, measuring current < i r climatic category in accordance with iec 68- 1 40/085/56 (C 40 c/+ 85 c/56 days damp heat test) soldering according to cecc 00802 wave soldering maximum 260 c, 5 s infrared soldering maximum 250 c, 5 s temperature/time profile >215 c, max. 60 s vapour- phase soldering maximum (215 5) c, 20 to 60 s solderability (230 5) c, (3 0,5) s wetting of soldering area: 3 90 % resistance to soldering heat (260 5) c, (10 0,5) s after 5 min preheating at (120 10) c | d l / l | 5 %, | d q/q| 20 % permissible pcb bending 2 mm (100 mm long standard pcb)
smt inductors simid 0603 b82496- a 8 11.98 siemens matsushita components published by siemens matsushita components gmbh & co. kg marketing kommunikation, postfach 80 17 09, d- 81617 mnchen ? siemens matsushita components 1998. all rights reserved. a s far as patents or other rights of third parties are concerned, liability is only assumed for compo- nents per se, not for applications, processes and circuits implemented within components or assemblies. t he information describes the type of component and shall not be considered as assured characteristics. t erms of delivery and rights to change design reserved. t his brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of siemens ag, passive components and electron tubes group, in the federal republic of germany or the inter- national siemens companies and representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
|
